??
摘 要:The process properties and interface behavior of CO2 laser brazing with automatic wire feed for galvanized steel sheets were investigated, in which the brazing filler metal was CuSi3 and no flux was used. As to the appearance quality of the brazing seams, the roles of the processing parameters, such as brazing speed, wire feeding rate, inclination and feeding direction of the wire, laser power, spot diameter and heating position, were assessed. The further investigation indicates that the behavior of the active elements Si, Mn and Zn are significantly influenced by energy input. At the interface, the microstractare of the base metal was composed of columnar crystals and the acicular ot solid solution was found on the filler metal side.
Laser brazing with filler wire for galvanized steel sheets.pdf
