亞德客二聯件BC2000|亞德客氣源處理元件

磁性開關產品介紹：

氣壓傳動系統中，氣源處理件是指空氣過濾器、減壓閥和油霧器，有些品牌的電磁閥和氣缸能夠?qū)崿F(xiàn)無油潤滑（靠潤滑脂實現潤滑功能），便不需要使用油霧器！過濾度一般為50-75μm，調壓范圍為0.5-10Mpa，如需過濾精度為5-10μm，10-20μm，25-40μm，及調壓為0.05-0.3Mpa，0.05-1Mpa三大件無管連接而成的組件稱為三聯件。三大件是多數氣動系統中不可缺少的氣源裝置，安裝在用氣設備近處，是壓縮空氣質量的最后保證。三大件的安裝順序依進氣方向分別為空氣過濾器、減壓閥和油霧器。空氣過濾器和減壓閥組合在一起可以稱為氣動二聯件。還可以將空氣過濾器和減壓閥集裝在一起，便成為過濾減壓閥（功能與空氣過濾器和減壓閥結合起來使用一樣）。有些場合不能允許壓縮空氣中存在油霧，則需要使用油霧分離器將壓縮空氣中的油霧過濾掉。總之，這幾個元件可以根據需要進行選擇，并可以將他們組合起來使用。 

空氣過濾器用于對氣源的清潔，可過濾壓縮空氣中的水分，避免水分隨氣體進入裝置。 

減壓閥可對氣源進行穩壓，使氣源處于恒定狀態，可減小因氣源氣壓突變時對閥門或執行器等硬件的損傷。過濾器用于對氣源的清潔，可過濾壓縮空氣中的水份，避免水份隨氣體進入裝置。 

油霧器可對機體運動部件進行潤滑，可以對不方便加潤滑油的部件進行潤滑，大大延長機體的使用壽命。 

 

Introduction of magnetic switch products:

Pneumatic transmission system, gas processing refers to air filter, regulator and lubricator, some brands of electromagnetic valve and the cylinder can be achieved without oil lubrication (by grease lubrication function, implementation) need not use oil mist! Filtration degree is generally 50-75 mu m, the pressure range is 0.5-10Mpa, if the filter accuracy is 5-10 mu m, 10-20 mu m, 25-40 m, and adjust voltage for 0.05-0.3Mpa, 0.05-1Mpa three large pieces of pipe connected components called sanlian. Three is the most large pneumatic air system indispensable, installed in the vicinity of the gas equipment, is compressed air quality guarantee. The installation sequence of the three pieces is respectively an air filter, a pressure reducing valve and an oil sprayer according to the air intake direction. Air filter and pressure reducing valve together can be called pneumatic two pieces. Can also be air filter and pressure relief valve assembly together, will become the filter valve (with air filter and pressure relief valve combination.). Some situations can not allow the presence of oil mist in compressed air, you need to use oil mist separator compressed air mist filter out. In short, these components can be selected according to need, and can be combined to use them.

The air filter is used for cleaning the air source, filtering the moisture in the compressed air and avoiding water entering the device with the gas.

Pressure relief valve can be regulated on the gas source, so that the gas source in a constant state, can reduce gas pressure due to sudden changes in the valve or actuator hardware damage. The filter is used for cleaning the air source, can filter the moisture in compressed air, avoid moisture entering the device with the gas.

The oil mist sprayer can lubricate the moving parts of the machine body, can lubricate the components which are inconvenient to lubricate, and prolong the service life of the machine body.